Same Frutteto CVT
Automatic transmission fluid capacity & service interval
Same Frutteto CVT uses automatic transmission fluid with a capacity range of 53 to 58 liters. Service intervals include checks at 300 hours and changes at 1200 hours or 12 months. The data covers 10 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Frutteto CVT 100, Stage 5->ZKDHF90200TS50001 (2020- ) |
|
| Frutteto CVT 100, Stage 5->ZKDHW002W0TS50001 (2020- ) |
|
| Frutteto CVT 105, Stage 5->ZKDHG10200TS50001 (2020- ) |
|
| Frutteto CVT 105, Stage 5->ZKDLZ902W0TS50001 (2020- ) |
|
| Frutteto CVT 115, Stage 5->ZKDHG10200TS50001 (2020- ) |
|
| Frutteto CVT 115, Stage 5->ZKDHW402W0TS50001 (2020- ) |
|
| Frutteto CVT 90, Stage 5->ZKDHF80200TS50001 (2020- ) |
|
| Frutteto CVT 90, Stage 5->ZKDLZ102W0TS50001 (2020- ) |
|
| Frutteto CVT 95, Stage 5->ZKDHG00200TS50001 (2020- ) |
|
| Frutteto CVT 95, Stage 5->ZKDLZ502W0TS50001 (2020- ) |
|
Additional Notes
- The Same Frutteto CVT transmission/transaxle fluid capacity is 53 liters across all five power variants — the CVT 90, CVT 95, CVT 100, CVT 105, and CVT 115 — when the front axle suspension system is not present.
- When the front axle suspension option is fitted, the transmission/transaxle fluid capacity rises to 58 liters, a 5-liter increase that reflects the additional fluid volume required to serve the suspension-integrated axle circuit.
- Each of the five power variants carries two serial number series, one beginning with a prefix such as ZKDHF, ZKDHG, or ZKDHW, and another beginning with ZKDLZ, yet both series within each variant share identical fluid capacity and service interval specifications.
- All ten configurations listed are Stage 5 emissions-compliant variants, with serial number ranges beginning from 2020 onward.
- The fluid check interval is set at 300 hours under normal use conditions, meaning the transmission fluid level is to be inspected at that point rather than replaced.
- The fluid change interval under normal use conditions is 1,200 hours or 12 months, whichever comes first. The dual-trigger structure means time elapsed can mandate a change even when the hour threshold has not been reached, which is relevant for machines operating at low annual hours.
- The 1,200-hour change interval is four times longer than the 300-hour check interval, indicating that multiple fluid level inspections are expected between each full fluid replacement service.