Reform Metrac

Manual transmission fluid capacity & service interval

Reform Metrac manual transmission fluid capacity ranges from 4,5 to 7,75 liters. Service intervals consist of checks every 200 hours and fluid changes every 600 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Metrac 4004 (1992-2000)
  • Use: Normal
  • Capacity 7,75 liter
  • Check 200 hours
  • Change 600 hours/ 24 months
Metrac 4004 H (1992-2000)
  • Use: Normal
  • Capacity 4,5 liter
  • Check 200 hours
  • Change 600 hours/ 24 months
Metrac 2003 (1989-2000)
  • Use: Normal
  • Capacity 4,5 liter
  • Check 200 hours
  • Change 600 hours/ 24 months
Metrac 3003, S, K (1989-2000)
  • Use: Normal
  • Capacity 4,9 liter
  • Check 200 hours
  • Change 600 hours/ 24 months

Additional Notes

  • The Reform Metrac 2003 and Metrac 4004 H share an identical manual transmission fluid capacity of 4.5 liters, despite belonging to different model lines within the same production era.
  • The Metrac 3003, 3003 S, and 3003 K carry a manual transmission fluid capacity of 4.9 liters, placing them between the 4.5-liter and 7.75-liter figures seen across the Metrac range.
  • The Metrac 4004 holds the largest manual transmission fluid capacity in the range at 7.75 liters, a figure notably higher than the 4.5-liter capacity of the Metrac 4004 H, indicating a substantially different transmission assembly between the two 4004 variants despite sharing a model year window of 1992-2000.
  • All four configurations share a fluid check interval of 200 operating hours under normal use conditions, reflecting a consistent monitoring schedule across the Metrac lineup regardless of capacity differences.
  • The change interval for manual transmission fluid across all listed configurations is 600 hours or 24 months under normal use, whichever comes first, combining an hour-based threshold with a calendar-based limit.
  • The Metrac 2003, 3003 series, and 4004 variants all carry a production window starting in 1989 or 1992 and ending in 2000, with all service intervals expressed in operating hours rather than distance, which is standard practice for hour-metered machinery such as tractors and utility vehicles.

Other Systems