Reform Metrac

Brake fluid capacity & service interval

Reform Metrac requires brake fluid with a capacity range of 0,2 to 0,25 liters. Service intervals include a check every 100 hours and a change every 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Metrac H7 X, 39D/1 (2016-2022)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 100 hours
  • Change 24 months
Metrac H8 X, 34D/7 (2016-2022)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 100 hours
  • Change 24 months
Metrac H6 X (2011-2013)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 100 hours
  • Change 24 months
Metrac H7 X (2011-2013)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 100 hours
  • Change 24 months
Metrac 4004 (1992-2000)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 100 hours
  • Change 24 months
Metrac 4004 H (1992-2000)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 100 hours
  • Change 24 months
Metrac 2003 (1989-2000)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 100 hours
  • Change 24 months
Metrac 3003, S, K (1989-2000)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 100 hours
  • Change 24 months

Additional Notes

  • Across all Reform Metrac configurations covered, brake fluid specifications apply to the hydraulic brake system under normal use conditions.
  • The Reform Metrac 2003 and the Metrac 3003, S, and K variants, both spanning 1989-2000, share a brake fluid capacity of 0.2 liters, the smallest figure in the dataset.
  • The Metrac 4004 and 4004 H, introduced in 1992, carry a slightly higher brake fluid capacity of 0.25 liters compared to the earlier 2003 and 3003 series, reflecting a difference in hydraulic system volume between these model lines.
  • The 0.25-liter capacity established by the 4004 series in 1992 is also shared by all later Metrac X-series models, including the H6 X, H7 X, and H8 X configurations.
  • A 100-hour check interval applies uniformly across all listed Metrac models. On tractors and similar machinery, hour-based intervals tie service actions to actual machine use rather than calendar time alone.
  • A 24-month change interval accompanies the 100-hour check across every listed configuration. Brake fluid absorbs moisture over time, which lowers its boiling point, so calendar-based replacement intervals are standard practice regardless of operating hours accumulated.
  • The combination of a 100-hour check and a 24-month fluid change means whichever threshold is reached first would typically govern service timing in real-world operation.
  • The H7 X appears in two distinct production windows: 2011-2013 and again as the H7 X 39D/1 in 2016-2022, both with identical 0.25-liter capacity and the same check and change intervals.
  • The Metrac H8 X 34D/7, covering 2016-2022, shares the same 0.25-liter brake fluid capacity and service intervals as the H7 X 39D/1 from the same period, indicating a consistent hydraulic brake system specification across the X-series lineup of that era.

Other Systems