New Holland TN-DA

Brake fluid capacity & service interval

The New Holland TN-DA uses brake fluid with a capacity ranging from 0.7 liter to 1.2 liter depending on the configuration. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TN60DA (2004-2008)
  • Use: Normal
  • Capacity 0,7 liter
  • Capacity 1,2 liter (+ front brakes)
TN70DA (2004-2008)
  • Use: Normal
  • Capacity 0,7 liter
  • Capacity 1,2 liter (+ front brakes)
TN75DA (2004-2008)
  • Use: Normal
  • Capacity 0,7 liter
  • Capacity 1,2 liter (+ front brakes)

Additional Notes

  • The New Holland TN-DA series covers three configurations across the 2004-2008 model years: the TN60DA, TN70DA, and TN75DA, all sharing identical brake fluid capacity specifications within the hydraulic brake system.
  • A base capacity of 0.7 liter applies to the rear-only hydraulic brake system on all three configurations, representing the standard fill volume when front brakes are not part of the circuit.
  • When front brakes are included in the hydraulic circuit, the total capacity rises to 1.2 liters across all three configurations, reflecting the additional fluid volume required to fill the front brake lines and components.
  • The difference between the 0.7-liter and 1.2-liter figures, approximately 0.5 liter, represents the fluid volume attributed specifically to the front brake circuit when present.
  • All three configurations carry a Normal use condition designation, meaning the listed capacities apply under standard operating conditions rather than a severe-duty or first-change-only scenario.
  • Despite the TN60DA, TN70DA, and TN75DA representing different power ratings within the TN-DA range, no variation in brake fluid capacity exists between them, indicating a shared hydraulic brake system architecture across the lineup for the 2004-2008 period.

Other Systems