New Holland TN-FA

Brake fluid capacity & service interval

New Holland TN-FA brake fluid capacity ranges from 0,2 to 0,5 liters. Service intervals include a check every 10 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TN75FA (2004-2008)
  • Use: Normal
  • Capacity 0,5 liter
  • Capacity 0,2 liter (+ front brakes)
  • Check 10 hours
TN85FA (2004-2008)
  • Use: Normal
  • Capacity 0,5 liter
  • Capacity 0,2 liter (+ front brakes)
  • Check 10 hours
TN95FA (2004-2008)
  • Use: Normal
  • Capacity 0,5 liter
  • Capacity 0,2 liter (+ front brakes)
  • Check 10 hours

Additional Notes

  • The New Holland TN-FA series covers three variants across the 2004-2008 model years: the TN75FA, TN85FA, and TN95FA, all sharing identical brake fluid specifications for the hydraulic brake system.
  • Each variant carries a base brake fluid capacity of 0.5 liter, which represents the standard rear brake circuit fill volume for the hydraulic brake system.
  • An additional 0.2 liter is specified when front brakes are included, bringing the total system capacity to 0.7 liter on configurations equipped with front brake hardware.
  • The split between the 0.5 liter base figure and the 0.2 liter front brake supplement reflects a two-circuit hydraulic layout, where the front axle braking circuit is fed separately from the primary rear system volume.
  • A check interval of 10 hours is assigned to all three variants under normal use conditions, indicating a very frequent fluid level inspection schedule consistent with the demanding operating environments typical of agricultural tractors.
  • The uniform capacity and interval figures across the TN75FA, TN85FA, and TN95FA suggest the hydraulic brake system architecture is shared across the entire TN-FA range regardless of engine output designation.

Other Systems