Massey Ferguson 600

Coolant capacity & service interval

Massey Ferguson 600 uses coolant with a capacity range of 14,2 to 19,3 liters. Service intervals include checking every 10 hours and changing every 500 hours. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 698T (1984-1986)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 500 hours
MF 699 (1984-1986)
  • Use: Normal
  • Capacity 19,3 liter
  • Check 10 hours
  • Change 500 hours
MF 698 (1983-1986)
  • Use: Normal
  • Capacity 15,9 liter
  • Check 10 hours
  • Change 500 hours
MF 675 (1982-1986)
  • Use: Normal
  • Capacity 14,2 liter
  • Check 10 hours
  • Change 500 hours
MF 690 (1982-1986)
  • Use: Normal
  • Capacity 14,2 liter
  • Check 10 hours
  • Change 500 hours

Additional Notes

  • The Massey Ferguson 600 series coolant capacities range from 14.2 liters on the MF 675 and MF 690 up to 19.3 liters on the MF 699, reflecting meaningful differences in engine displacement and thermal management demands across the lineup.
  • The MF 675 and MF 690 share an identical cooling system capacity of 14.2 liters across their 1982-1986 production years, indicating a common engine cooling architecture between the two models.
  • The MF 698, produced from 1983-1986, carries a 15.9-liter cooling system capacity, placing it between the lower-capacity 675/690 pair and the turbocharged 698T variant.
  • The MF 698T, introduced in 1984, holds 18 liters of coolant, a notably higher figure than the naturally aspirated MF 698 at 15.9 liters, consistent with the greater heat rejection requirements of a turbocharged engine.
  • The MF 699 carries the largest cooling system capacity in the series at 19.3 liters, suggesting a larger or more thermally demanding engine configuration relative to all other models in the 600 series.
  • A 10-hour coolant level check interval applies uniformly across all five models under normal use conditions, reflecting the critical importance of maintaining proper coolant levels in agricultural equipment operating under sustained load.
  • The coolant change interval of 500 hours is consistent across the MF 675, MF 690, MF 698, MF 698T, and MF 699 under normal use conditions, indicating a standardized service schedule across the series regardless of capacity differences.

Other Systems