Massey Ferguson 6100

Coolant capacity & service interval

Massey Ferguson 6100 coolant capacity ranges from 17 to 25 liters. Service intervals include checking at 100 hours and changing at 1000 hours or 12 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 6110 (1995-1999)
  • Use: Normal
  • Capacity 17 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6120 (1995-1996)
  • Use: Normal
  • Capacity 17 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6130 (1995-1999)
  • Use: Normal
  • Capacity 17 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6140 (1995-1999)
  • Use: Normal
  • Capacity 17 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6150 (1995-1999)
  • Use: Normal
  • Capacity 17 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6160 (1995-1999)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6170 (1995-1999)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6180 (1995-1999)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 6190 (1995-1999)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Massey Ferguson 6100 series cooling system capacities fall into two distinct groups across the model range. The MF 6110 through MF 6150 each carry 17 liters, while the MF 6160 through MF 6190 each carry 25 liters, reflecting the larger engine displacements found in the upper models of the series.
  • A 17-liter cooling system capacity is a substantial volume typical of mid-range agricultural tractor engines, where sufficient coolant mass is needed to manage heat across extended field operation cycles.
  • The 25-liter capacity on the four highest models in the range represents a roughly 47 percent increase over the 17-liter figure, consistent with the greater thermal load generated by higher-output engines requiring more coolant volume to maintain stable operating temperatures.
  • All nine models share an identical check interval of every 100 hours under normal use conditions. In agricultural equipment, a 100-hour check interval is a standard periodic inspection point rather than a full fluid change, allowing for top-up and visual assessment of coolant condition.
  • The coolant change interval across all models is 1000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger structure means a tractor used lightly enough to avoid 1000 hours in a year would still require a coolant change on the annual calendar threshold.
  • The MF 6120 carries a production span of 1995-1996, which is narrower than the 1995-1999 range shared by the other eight models. Despite the shorter production window, the cooling system specifications for the MF 6120 are identical to those of the MF 6110, MF 6130, MF 6140, and MF 6150.
  • The alignment of check and change intervals across all nine models, regardless of the capacity difference, indicates that service scheduling for the 6100 series cooling system does not vary with engine size within this generation.

Other Systems