Massey Ferguson 5700SL
Coolant capacity & service interval
Massey Ferguson 5700SL uses coolant with a capacity of 13,7 liters. Service intervals include checking every 10 hours and changing every 1500 hours or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MF 5710 SL (2016-2018) |
|
| MF 5711 SL (2016-2018) |
|
| MF 5712 SL (2016-2018) |
|
| MF 5713 SL (2016-2018) |
|
Additional Notes
- The Massey Ferguson 5700SL cooling system capacity is 13.7 liters across all four variants in the 5710 SL, 5711 SL, 5712 SL, and 5713 SL, indicating a service fill volume rather than a full overhaul drain, as cooling systems typically retain residual fluid in hoses and the block during a standard change.
- The 13.7-liter capacity figure is consistent across the 2016-2018 model years for every variant in the lineup, meaning no displacement or configuration difference within the 5700SL series produces a variation in cooling system volume.
- A coolant level check interval of 10 hours applies to all four variants under normal use conditions, which reflects the high-stress thermal environment typical of agricultural machinery operating under sustained load.
- The coolant change interval is specified at 1500 hours or 24 months, whichever comes first, under normal use conditions, meaning calendar time can trigger a change obligation even when the hour threshold has not been reached.
- The dual-trigger change interval of 1500 hours and 24 months reflects the degradation behavior of coolant additives, which break down over time regardless of engine operating hours, making the time-based threshold independently relevant.
- All four variants share identical check and change intervals, so the 5710 SL, 5711 SL, 5712 SL, and 5713 SL follow the same coolant service schedule without any model-specific deviation across the 2016-2018 production span.