Massey Ferguson 5700S

Differential fluid capacity & service interval

Massey Ferguson 5700S differential fluid capacity is 5 liters. Service intervals include checks at 200 hours and changes at 100, 1000 hours, or 12 months. The data covers 20 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MF 5709 S, Dyna-4 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5709 S, Dyna-4 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5709 S, Dyna-6 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5709 S, Dyna-6 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5710 S, Dyna-4 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5710 S, Dyna-4 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5710 S, Dyna-6 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5710 S, Dyna-6 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5711 S, Dyna-4 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5711 S, Dyna-4 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5711 S, Dyna-6 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5711 S, Dyna-6 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5712 S, Dyna-4 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5712 S, Dyna-4 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5712 S, Dyna-6 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5712 S, Dyna-6 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5713 S, Dyna-4 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5713 S, Dyna-4 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours
  • MF 5713 S, Dyna-6 (2018- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 1000 hours/ 12 months
  • MF 5713 S, Dyna-6 (2018- )
  • Front
  • Use: First change only
  • Capacity 5 liter
  • Change 100 hours

Additional Notes

  • The front differential fluid capacity across all Massey Ferguson 5700S variants listed — covering the MF 5709 S through MF 5713 S in both Dyna-4 and Dyna-6 transmission configurations — is uniformly 5 liters. A consistent capacity across all models in a series typically reflects a shared front axle assembly rather than axle designs scaled to individual power outputs.
  • Under normal use conditions, the front differential fluid interval is set at 1000 hours or 12 months, whichever comes first. The dual-trigger structure means calendar time can mandate a fluid change even when hour accumulation remains below the 1000-hour threshold, which is relevant for machines operated seasonally or at low annual hours.
  • A fluid level check at 200 hours is specified under normal use conditions, separate from the full change interval. A mid-interval check at roughly one-fifth of the change interval allows early detection of fluid loss or contamination without requiring a full drain and refill.
  • A first-change-only interval of 100 hours is specified for all listed models regardless of transmission type. An early first change is standard practice for new mechanical assemblies, as initial operation generates fine metallic particles from component break-in that are removed before the normal long-term interval begins.
  • The first-change-only service at 100 hours carries no capacity figure distinct from the normal 5-liter value, meaning the drain and refill volume at the break-in change is the same as at subsequent normal-interval changes.
  • The Dyna-4 and Dyna-6 designations refer to semi-powershift transmission variants with four and six power-shift steps respectively. Despite the mechanical differences between these two transmission types, the front differential fluid specifications are identical across both configurations for every model in the 5700S range listed here.
  • The 5700S series spans five model designations — MF 5709 S, 5710 S, 5711 S, 5712 S, and 5713 S — each available with Dyna-4 or Dyna-6 transmissions, producing ten distinct configurations. All ten share the same front differential capacity, check interval, normal change interval, and first-change interval without variation.

Other Systems