Massey Ferguson 5700M

Coolant capacity & service interval

Massey Ferguson 5700M coolant capacity is 16 liters. Service intervals include checking every 10 hours and changing every 1500 hours or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 5709 M, Dyna-4 (2021- )
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 5710 M, Dyna-4 (2021- )
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 5711 M, Dyna-4 (2021- )
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months

Additional Notes

  • The Massey Ferguson 5700M cooling system capacity is 16 liters across the MF 5709 M, MF 5710 M, and MF 5711 M Dyna-4 configurations, each representing a full system fill volume.
  • A coolant level check interval of 10 hours applies to all three Dyna-4 variants, reflecting a very frequent inspection schedule typical of high-load agricultural equipment operating conditions.
  • The coolant change interval is set at 1500 hours or 24 months, whichever comes first, under normal use conditions for the MF 5709 M, MF 5710 M, and MF 5711 M Dyna-4 models starting from 2021.
  • The 16-liter capacity figure is consistent across all three Dyna-4 variants in the 5700M lineup, indicating no variation in cooling system volume between the MF 5709 M, MF 5710 M, and MF 5711 M configurations.
  • The dual-condition change interval of 1500 hours or 24 months means a time-based threshold of two years can trigger a coolant change even when the hourly threshold has not been reached, as both conditions apply under normal use.

Other Systems