Massey Ferguson 1200

Power steering fluid capacity & service interval

Massey Ferguson 1200 uses power steering fluid with a capacity range of 1,1 to 2,5 liters. Service intervals include a check every 10 hours and a change every 300 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 1210 (1994-1998)
  • Use: Normal
  • Capacity 1,1 liter
  • Check 10 hours
  • Change 300 hours
MF 1220 (1994-2002)
  • Use: Normal
  • Capacity 1,1 liter
  • Check 10 hours
  • Change 300 hours
MF 1230 (1994-2002)
  • Use: Normal
  • Capacity 1,1 liter
  • Check 10 hours
  • Change 300 hours
MF 1240 (1994-2002)
  • Use: Normal
  • Capacity 2,5 liter
  • Check 10 hours
  • Change 300 hours
MF 1250 (1994-2002)
  • Use: Normal
  • Capacity 2,5 liter
  • Check 10 hours
  • Change 300 hours
MF 1260 (1994-2002)
  • Use: Normal
  • Capacity 2,5 liter
  • Check 10 hours
  • Change 300 hours

Additional Notes

  • The Massey Ferguson 1200 series power steering systems fall into two distinct capacity groups: the MF 1210, MF 1220, and MF 1230 hold 1.1 liters, while the MF 1240, MF 1250, and MF 1260 hold 2.5 liters. The larger capacity in the upper models reflects a more substantial hydraulic steering circuit, consistent with heavier or higher-horsepower tractor configurations.
  • All six models in the 1200 series share an identical check interval of every 10 operating hours. In agricultural equipment, a 10-hour check interval is a short-cycle inspection point, intended to catch fluid level drops early before steering performance or component wear is affected.
  • The fluid change interval is set at 300 operating hours across all models, from the MF 1210 through the MF 1260. At 300 hours, power steering fluid is typically replaced to remove accumulated moisture, metal particles, and degraded additives that reduce hydraulic efficiency over time.
  • All specifications are rated for normal use conditions. In agricultural equipment service, normal use generally refers to standard field and transport operation without sustained extreme loads, temperatures, or contamination exposure that would otherwise shorten fluid service life.
  • The MF 1210 carries a production window of 1994-1998, while the MF 1220 through MF 1260 span 1994-2002. Despite the shorter production run of the MF 1210, its power steering capacity and service intervals are identical to the MF 1220 and MF 1230.
  • The step from 1.1 liters to 2.5 liters between the lower and upper models represents a capacity increase of approximately 127 percent. A larger reservoir volume in a power steering system generally supports greater heat dissipation and fluid reserve, which is relevant in heavier-duty steering applications.

Other Systems