Massey Ferguson 1200

Differential fluid capacity & service interval

Massey Ferguson 1200 differential fluid capacity ranges from 4,1 to 6,1 liters. Service intervals include checking at 50 hours and changing at 300 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MF 1210 (1994-1998)
  • Front
  • Use: Normal
  • Capacity 4,1 liter
  • Check 50 hours
  • Change 300 hours
  • Code: (4x4)
  • MF 1220 (1994-2002)
  • Front
  • Use: Normal
  • Capacity 4,1 liter
  • Check 50 hours
  • Change 300 hours
  • Code: (4x4)
  • MF 1230 (1994-2002)
  • Front
  • Use: Normal
  • Capacity 4,5 liter
  • Check 50 hours
  • Change 300 hours
  • Code: (4x4)
  • MF 1240 (1994-2002)
  • Front
  • Use: Normal
  • Capacity 6,1 liter
  • Check 50 hours
  • Change 300 hours
  • Code: (4x4)
  • MF 1250 (1994-2002)
  • Front
  • Use: Normal
  • Capacity 6,1 liter
  • Check 50 hours
  • Change 300 hours
  • Code: (4x4)
  • MF 1260 (1994-2002)
  • Front
  • Use: Normal
  • Capacity 6,1 liter
  • Check 50 hours
  • Change 300 hours
  • Code: (4x4)

Additional Notes

  • All six models in the Massey Ferguson 1200 series share a uniform service interval structure for the front differential: a fluid level check at every 50 operating hours and a full fluid change at every 300 operating hours, both under normal use conditions.
  • The MF 1210 and MF 1220 share an identical front differential fluid capacity of 4.1 liters, placing them in the lowest capacity group within the series.
  • The MF 1230 carries a front differential capacity of 4.5 liters, a modest increase over the 4.1-liter figure of the smaller models, reflecting a slightly larger front axle assembly.
  • The MF 1240, MF 1250, and MF 1260 each specify a front differential capacity of 6.1 liters, the highest value in the series, consistent with heavier-duty front axle configurations on larger compact utility tractors.
  • The 300-hour change interval for front differential fluid is an hour-based schedule rather than a calendar-based one, which is standard practice for agricultural equipment where annual operating hours vary widely depending on workload.
  • The 50-hour check interval serves as a monitoring point rather than a change event, allowing operators to detect fluid loss or contamination between full service intervals without draining the differential.
  • The MF 1210 has a model year range of 1994-1998, while the MF 1220 through MF 1260 share a range of 1994-2002, meaning the 1210 had a shorter production window yet carried the same service schedule as the 1220.

Other Systems