Landini Rex3

Differential fluid capacity & service interval

Landini Rex3 uses differential fluid with a capacity of 4 liters. Service intervals include checking every 10 hours and changing every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Rex 3-060F (2019- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • Rex 3-060GE (2019- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • Rex 3-070F (2019- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • Rex 3-070GE (2019- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • Rex 3-080F (2019- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months
  • Rex 3-080GE (2019- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • All six Landini Rex 3 variants covered in these specifications share an identical front differential fluid capacity of 4 liters, indicating a uniform front axle housing size across the 060, 070, and 080 engine configurations in both the F and GE transmission variants.
  • The 4-liter figure represents a service fill capacity, which is the volume required when refilling a drained but otherwise intact differential housing during routine maintenance, as opposed to a larger overhaul capacity that would account for additional passages or components.
  • A fluid level check interval of 10 hours applies to all six variants under normal use conditions, reflecting the relatively short early inspection period typical of agricultural equipment operating in variable terrain and load conditions.
  • The change interval is specified as 1000 hours or 12 months, whichever comes first, meaning calendar time serves as an independent trigger regardless of accumulated operating hours, which is relevant for machines used seasonally at low annual hour totals.
  • The F and GE designations across the 060, 070, and 080 variants do not produce any difference in front differential capacity or service intervals, with all rows carrying the same 4-liter fill, 10-hour check, and 1000-hour/12-month change schedule.

Other Systems