Landini Rex3

Coolant capacity & service interval

Landini Rex3 coolant capacity is 15 liters. Service intervals include checks at 100 hours and changes at 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Rex 3-060F (2019- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Rex 3-060GE (2019- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Rex 3-070F (2019- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Rex 3-070GE (2019- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Rex 3-080F (2019- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
Rex 3-080GE (2019- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Landini Rex3 cooling system capacity is 15 liters across all six variants listed, covering the 060F, 060GE, 070F, 070GE, 080F, and 080GE configurations. A 15-liter figure is typical of a full cooling system fill, encompassing the engine block, cylinder head passages, radiator, and associated hoses rather than a partial or top-up quantity.
  • The coolant check interval is set at 100 hours for all listed variants under normal use conditions. In agricultural equipment, a 100-hour check interval aligns with routine scheduled maintenance stops, allowing inspection of coolant level and condition without requiring a full drain and refill.
  • The coolant change interval is specified as 2000 hours or 24 months, whichever comes first, across all six variants. The dual-trigger format means calendar time can mandate a change even when the hourly threshold has not been reached, which is relevant for machines operated at lower annual hours.
  • All six variants share identical coolant specifications, despite the numerical designations 060, 070, and 080 indicating different power or displacement ratings within the Rex3 range. The uniform 15-liter capacity across these variants suggests a common engine block architecture or cooling circuit design shared across the lineup.
  • The F and GE suffix variants within each power class, such as the 060F and 060GE, carry the same coolant capacity and service intervals. The F and GE designations typically refer to transmission or cab configuration differences, which do not affect the cooling system volume or maintenance schedule in these specifications.
  • All specifications are listed under normal use conditions. In service documentation, normal use typically refers to standard operating environments without the accelerated wear factors associated with severe-duty classifications such as extreme dust, sustained high loads, or frequent cold starts.

Other Systems