Landini Rex3

Brake fluid capacity & service interval

Landini Rex3 uses brake fluid with a capacity of 1 liter. Service intervals require a check every 10 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Rex 3-060F (2019- )
  • Use: Normal
  • Capacity 1 liter
  • Check 10 hours
Rex 3-060GE (2019- )
  • Use: Normal
  • Capacity 1 liter
  • Check 10 hours
Rex 3-070F (2019- )
  • Use: Normal
  • Capacity 1 liter
  • Check 10 hours
Rex 3-070GE (2019- )
  • Use: Normal
  • Capacity 1 liter
  • Check 10 hours
Rex 3-080F (2019- )
  • Use: Normal
  • Capacity 1 liter
  • Check 10 hours
Rex 3-080GE (2019- )
  • Use: Normal
  • Capacity 1 liter
  • Check 10 hours

Additional Notes

  • The Landini Rex3 hydraulic brake system holds 1 liter of brake fluid across all six configurations covered by these specifications: the Rex 3-060F, Rex 3-060GE, Rex 3-070F, Rex 3-070GE, Rex 3-080F, and Rex 3-080GE.
  • A 1-liter brake fluid capacity is a relatively modest volume, consistent with the compact hydraulic brake circuits found on utility tractors in the Rex3 class rather than the larger reservoirs associated with heavy agricultural machinery.
  • The check interval for the hydraulic brake system is set at 10 hours of operation under normal use conditions across all six variants. A 10-hour interval is notably short and reflects the safety-critical nature of brake fluid monitoring, where contamination or level loss can have immediate consequences.
  • The F and GE suffix designations across the 060, 070, and 080 variants represent distinct configurations within the Rex3 range, yet both transmission types share identical brake fluid capacity and check interval values of 1 liter and 10 hours respectively.
  • The three power variants in these specifications, the 060, 070, and 080, differ in engine output but carry no variation in brake fluid capacity or service interval, indicating a standardized hydraulic brake circuit design across the Rex3 power range from 2019 onward.
  • The specifications apply to the hydraulic brake system specifically, distinguishing the brake fluid circuit from other fluid systems on the tractor. Hydraulic brake systems use fluid pressure to actuate braking force, making fluid level and condition directly relevant to braking performance.

Other Systems