Lamborghini Spire VRT

Differential fluid capacity & service interval

Lamborghini Spire VRT differential fluid capacity is 6 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Spire 105 VRT, Stage 5->ZKDHT80200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire 115 VRT, Stage 5->ZKDHT90200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire 95 VRT, Stage 5->ZKDHT70200TL50001 (2021- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire 100 VRT, Stage 3B->ZKDET80200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire 100.4 VRT, Stage 3B->ZKDEU60200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire 110.4 VRT, Stage 3B->ZKDEV00200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire 90 VRT, Stage 3B->ZKDET40200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Spire 90.4 VRT, Stage 3B->ZKDEU20200TL50001 (2017-2021)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Lamborghini Spire VRT front differential holds 6 liters of fluid across all listed configurations, from the Spire 90 VRT through the Spire 115 VRT. A 6-liter capacity is consistent with a heavy-duty agricultural or utility differential housing, where larger fluid volumes support sustained load-bearing operation and thermal management.
  • All eight configurations share an identical service interval structure: a fluid level check at 300 hours and a full fluid change at 1200 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format of hours combined with a calendar interval reflects standard practice for equipment that may accumulate operating hours at variable rates across seasons.
  • The 300-hour check interval represents roughly one-quarter of the full change interval, allowing for early detection of fluid contamination or level loss before the scheduled drain. No separate severe-use interval is listed; all rows carry the normal use designation.
  • Stage 3B configurations cover the Spire 90 VRT, 90.4 VRT, 100 VRT, 100.4 VRT, and 110.4 VRT for the 2017-2021 model years. Stage 5 configurations cover the Spire 95 VRT, 105 VRT, and 115 VRT, with a starting year of 2021. Despite the difference in stage designation, the front differential fluid capacity and service intervals are identical across both stage groups.
  • The serial number thresholds listed for each configuration, such as ZKDET80200TL50001 for the Spire 100 VRT Stage 3B, indicate that the specifications apply from that serial number onward. Serial number breakpoints are commonly used in agricultural equipment to distinguish production runs that may carry revised component specifications.
  • The ".4" suffix appearing in the Spire 90.4 VRT, 100.4 VRT, and 110.4 VRT designations typically denotes a sub-variant, often associated with a different engine displacement or transmission pairing. All three .4 variants share the same 6-liter front differential capacity and 1200-hour or 12-month change interval as their non-.4 counterparts.

Other Systems