Lamborghini Spire VRT

Brake fluid capacity & service interval

Lamborghini Spire VRT uses brake fluid with a capacity of 1 liter. The service interval for the fluid is 50 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Spire 105 VRT, Stage 5->ZKDHT80200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire 115 VRT, Stage 5->ZKDHT90200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire 95 VRT, Stage 5->ZKDHT70200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire 100 VRT, Stage 3B->ZKDET80200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire 100.4 VRT, Stage 3B->ZKDEU60200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire 110.4 VRT, Stage 3B->ZKDEV00200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire 90 VRT, Stage 3B->ZKDET40200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire 90.4 VRT, Stage 3B->ZKDEU20200TL50001 (2017-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours

Additional Notes

  • The Lamborghini Spire VRT hydraulic brake system holds a capacity of 1 liter across all listed configurations, spanning the Spire 90, 90.4, 100, 100.4, and 110.4 VRT Stage 3B variants from 2017-2021, as well as the Spire 95, 105, and 115 VRT Stage 5 variants from 2021.
  • A 1-liter brake fluid capacity is consistent with a service fill volume rather than a full system overhaul, reflecting the amount needed to maintain or replace fluid within the hydraulic circuit under normal operating conditions.
  • The brake fluid change interval is set at 50 hours across all eight configurations. In equipment serviced by operating hours rather than mileage or calendar time, a 50-hour interval represents a relatively frequent maintenance cycle, which is common for hydraulic brake systems exposed to heat cycling and moisture absorption.
  • All eight configurations carry a normal use condition for the 50-hour change interval. In service interval terminology, a normal use designation applies to standard operating environments, as opposed to severe conditions such as extreme temperatures, heavy loads, or dusty terrain, which typically shorten intervals.
  • The Stage 3B designation applies to the Spire 90, 90.4, 100, 100.4, and 110.4 VRT variants covering 2017-2021, while the Stage 5 designation applies to the Spire 95, 105, and 115 VRT variants from 2021. Despite the difference in stage classification, both groups share identical brake fluid capacity and change interval specifications.
  • Each configuration is identified by a unique serial number threshold following the arrow notation (e.g., ->ZKDET80200TL50001), which indicates that the listed specifications apply to units at or above that serial number within the stated model year range.
  • The numeric designations within the model names, such as 90, 95, 100, 105, 110.4, and 115, reflect different power or engine output ratings across the Spire VRT lineup, yet the hydraulic brake system fluid capacity and service interval remain uniform at 1 liter and 50 hours regardless of output level.

Other Systems