Lamborghini Spire V VRT

Coolant capacity & service interval

Lamborghini Spire V VRT coolant capacity is 12 liters. Service intervals include checking at 10 hours and changing at 2400 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Spire V 100 VRT, Stage 5->ZKDHJ60200TL50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 105, Stage 5->ZKDHJ80200TL50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 115, Stage 5->ZKDKJ90200TL50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 90 VRT, Stage 5->ZKDHJ50200TL50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 95 VRT, Stage 5->ZKDHJ70200TL50001 (2021- )
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 100 VRT, ->ZKDEN00200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 105 VRT, ->ZKDEN80200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 115 VRT, ->ZKDEP20200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 90 VRT, ->ZKDEM60200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months
Spire V 90.4 VRT, ->ZKDEN40200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 2400 hours/ 24 months

Additional Notes

  • The Lamborghini Spire V VRT cooling system capacity is 12 liters across all listed configurations, spanning the 90 VRT, 90.4 VRT, 95 VRT, 100 VRT, 105 VRT, and 115 VRT variants. A 12-liter figure is consistent with a liquid-cooled engine cooling circuit that includes the radiator, engine block passages, and associated hoses, representing a full system fill rather than a partial top-up volume.
  • Coolant level checks are specified at every 10 operating hours under normal use conditions. In equipment measured by engine hours rather than distance, a 10-hour check interval reflects a relatively frequent inspection cycle, suited to machines that may accumulate hours rapidly during seasonal or intensive field use.
  • The coolant change interval is set at 2400 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure means calendar time governs the change even when operating hours remain low, since coolant additives degrade through chemical aging independently of engine runtime.
  • The 2400-hour threshold is a high operating-hour figure by comparison to typical automotive coolant intervals, which are usually expressed in mileage or annual terms. For equipment tracked in engine hours, 2400 hours can represent several years of active use depending on seasonal workload patterns.
  • Pre-2021 configurations are identified by serial number cutoffs ending at specific VIN-format codes such as ZKDEN00200TL50001 for the Spire V 100 VRT, while 2021 and later Stage 5 variants carry distinct serial number prefixes such as ZKDHJ60200TL50001. The serial number boundaries serve as the primary means of distinguishing specification applicability between the two production phases.
  • The 2018-2021 variants are designated with the VRT suffix, while configurations from 2021 onward carry the Stage 5 designation. Despite the generational distinction implied by these labels, the cooling system capacity and service intervals remain identical across both designations for every power variant listed.
  • The power variants covered in the specifications range from 90 to 115, with intermediate steps at 90.4, 95, 100, 105, and 115. All share the same 12-liter cooling system capacity, indicating the engine cooling circuit volume does not scale with the power output differences represented across the lineup.

Other Systems