Lamborghini Spire V VRT

Brake fluid capacity & service interval

Lamborghini Spire V VRT uses brake fluid with a capacity of 1 liter. The service interval for the fluid is 50 hours. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Spire V 100 VRT, Stage 5->ZKDHJ60200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 105, Stage 5->ZKDHJ80200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 115, Stage 5->ZKDKJ90200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 90 VRT, Stage 5->ZKDHJ50200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 95 VRT, Stage 5->ZKDHJ70200TL50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 100 VRT, ->ZKDEN00200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 105 VRT, ->ZKDEN80200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 115 VRT, ->ZKDEP20200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 90 VRT, ->ZKDEM60200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours
Spire V 90.4 VRT, ->ZKDEN40200TL50001 (2018-2021)
  • Use: Normal
  • Capacity 1 liter
  • Change 50 hours

Additional Notes

  • The Lamborghini Spire V VRT hydraulic brake system holds a capacity of 1 liter across all listed configurations, spanning the 90, 90.4, 95, 100, 105, and 115 engine variants. A 1-liter figure for a hydraulic brake system reflects a total system fill volume, accounting for the master cylinder reservoir, brake lines, and caliper circuits combined.
  • The 50-hour change interval applies under normal use conditions across every Spire V VRT configuration in the specifications. In equipment serviced by operating hours rather than distance, a 50-hour interval is a relatively frequent schedule, consistent with the demands placed on hydraulic brake fluid in high-load or variable-terrain operation.
  • Brake fluid is hygroscopic, meaning it absorbs moisture from the atmosphere over time. A time- or hours-based change interval, such as the 50-hour schedule listed here, addresses the gradual degradation of fluid performance caused by moisture absorption, which lowers the fluid's boiling point and can compromise braking effectiveness.
  • The Spire V 90 VRT and Spire V 90.4 VRT are listed as distinct configurations for the 2018-2021 period, with separate VIN cutoff identifiers (ZKDEM60200TL50001 and ZKDEN40200TL50001 respectively), indicating a mid-cycle variant within the same power class rather than a simple model year update.
  • Configurations carrying the Stage 5 designation are identified by different VIN prefix series compared to the earlier VRT units, reflecting a production sequence change. The Stage 5 variants of the 90, 95, 100, 105, and 115 share the same 1-liter capacity and 50-hour interval as the preceding VRT configurations.
  • The 95 VRT variant does not appear among the 2018-2021 VRT-designated rows, while a Spire V 95 VRT Stage 5 entry is present with a 2021 start. The 90.4 VRT, conversely, appears only in the 2018-2021 VRT group without a corresponding Stage 5 entry, indicating a difference in model lineup composition between the two production phases.

Other Systems