Lamborghini RF Target

Differential fluid capacity & service interval

Lamborghini RF Target differential fluid capacity is 6 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • RF.100 Target (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.60 Target Compact, ->1001/5001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.70 Target Compact, ->1001/5001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.80 Target Compact, ->1001/5001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.80.4 Target (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.90 Target (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • All six Lamborghini RF Target configurations covered in these specifications — the RF.60, RF.70, RF.80, RF.80.4, RF.90, and RF.100 — share an identical front differential fluid capacity of 6 liters for the 2011-2015 model years.
  • A 6-liter front differential capacity is a relatively substantial fill volume, consistent with the heavy-duty axle assemblies found on agricultural tractors rather than passenger vehicles.
  • The RF.60 Target Compact, RF.70 Target Compact, and RF.80 Target Compact entries each carry a serial number boundary notation of "->1001/5001," indicating the specifications apply to units produced up to those serial numbers within the 2011-2015 range.
  • The check interval for front differential fluid across all listed configurations is 300 hours under normal use conditions, meaning fluid level inspection is due well before any drain-and-fill service is required.
  • The change interval is specified as 1200 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger format means calendar time can mandate a fluid change even when the hourly threshold has not been reached.
  • At the 1200-hour change interval, the ratio between check and change intervals is 4:1, meaning a minimum of three intermediate fluid level checks fall between each full fluid change.
  • All specifications in these rows are designated for normal use conditions, meaning the 300-hour check and 1200-hour/24-month change intervals reflect standard operating environments rather than more demanding duty cycles.

Other Systems