Lamborghini RF COM3

Coolant capacity & service interval

Lamborghini RF COM3 coolant capacity ranges from 12 to 13 liters. Service intervals include checking at 10 hours and changing at 1200 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
RF.100, ->1001/10001 (2011-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
RF.100, ->5001/15001 (2011-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
RF.110, ->15001 (2011-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
RF.110, ->10001 (2011-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
RF.80, ->1001/10001 (2011-2015)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
RF.80, ->5001/15001 (2011-2015)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
RF.90, ->5001/15001 (2011-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
RF.90, ->1001/10001 (2010-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • Across the Lamborghini RF COM3 lineup, cooling system capacities fall into two values: 12 liters for the RF.80 variants and 13 liters for the RF.90, RF.100, and RF.110 variants. The 1-liter difference between the RF.80 and the larger-displacement models reflects the smaller engine's reduced thermal load and cooling circuit volume.
  • The RF.90 with serial range ->1001/10001 carries a coverage window starting from 2010, making it the earliest-dated configuration in the specifications, while all other variants are listed from 2011-2015.
  • Coolant checks are specified at every 10 operating hours across all variants. In agricultural and industrial equipment, a 10-hour check interval is standard practice during the early hours of a service cycle to catch leaks or level drops before they cause overheating damage.
  • The coolant change interval is set at 1200 hours or 24 months, whichever comes first, for all listed configurations. The dual-trigger format, combining an engine-hours threshold with a calendar limit, accounts for machines that accumulate hours slowly and would otherwise leave aging coolant in service beyond its effective lifespan.
  • All eight configurations are rated under normal use conditions. In fluid service specifications, a normal use designation typically reflects standard operating environments without the accelerated degradation associated with severe-duty classifications such as extreme dust, continuous high-load operation, or frequent cold starts.
  • The serial number suffixes ->1001/10001 and ->5001/15001 appear across the RF.80, RF.90, and RF.100 variants, indicating that the same cooling system specifications apply across different production serial ranges within each model designation. The RF.110 uses single serial range designations (->10001 and ->15001) rather than the paired format seen on other variants.

Other Systems