Lamborghini RF COM3

Differential fluid capacity & service interval

Lamborghini RF COM3 differential fluid capacity is 6 liter. Service intervals include checking at 300 hours and changing at 1200 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • RF.100, ->1001/10001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.100, ->5001/15001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.110, ->15001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.110, ->10001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.80, ->1001/10001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.80, ->5001/15001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.90, ->5001/15001 (2011-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • RF.90, ->1001/10001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Lamborghini RF COM3 front differential holds 6 liters of fluid across all listed configurations, including the RF.80, RF.90, RF.100, and RF.110 variants. A uniform capacity across multiple distinct model variants typically reflects a shared differential housing design.
  • The RF.90 in the ->1001/10001 serial range carries a model year span beginning in 2010, while all other listed configurations begin in 2011, making the RF.90 ->1001/10001 the earliest-covered variant in these specifications.
  • Serial number thresholds such as ->1001/10001 and ->5001/15001 denote production cutoff points within a given model line. Separate rows for these ranges on the RF.80 and RF.100 indicate that serial-specific distinctions were considered relevant enough to list independently, even where the resulting specifications are identical.
  • The RF.110 is listed with two separate serial ranges, ->10001 and ->15001, each covering the 2011-2015 span. As with the RF.80 and RF.100 serial splits, both RF.110 entries share the same 6-liter capacity and identical service intervals.
  • The front differential check interval across all configurations is set at 300 hours under normal use conditions. In hour-based service schedules common to agricultural and industrial equipment, a 300-hour check interval represents a mid-cycle inspection point rather than a fluid replacement event.
  • The fluid change interval is specified as 1200 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger format means calendar time can mandate a change even when the hourly threshold has not been reached, which is relevant for equipment operating at low annual hours.
  • At a 1200-hour change interval, the ratio between the check interval and the change interval is exactly 4:1 across all listed configurations. This means a fluid check is due at 300, 600, 900, and 1200 hours before a full change is required.

Other Systems