Lamborghini R2 COM3

Differential fluid capacity & service interval

Lamborghini R2 COM3 differential fluid capacity is 6 liters. Service intervals include checks at 50 hours and 300 hours, with changes required at 1200 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • R2.100 Hi-Profile, ->1001/15001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • R2.60, -> 1001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • R2.70, ->15001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • R2.70, ->20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • R2.80, ->5001/20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • R2.80, ->1001/15001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • R2.90, ->1001/15001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
  • R2.90, ->5001/20001 (2010-2015)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Lamborghini R2 COM3 front differential holds 6 liters of fluid across all listed configurations, from the R2.60 through the R2.100 Hi-Profile, covering the full 2010-2015 model range. A consistent capacity across multiple variants typically reflects a shared differential housing design rather than unit-specific sizing.
  • The change interval of 1200 hours or 24 months, whichever comes first, applies uniformly to all R2 COM3 configurations listed. The dual-trigger format means calendar time can mandate a fluid change even when the hour threshold has not been reached, which is relevant for machines used infrequently.
  • The R2.60 up to serial number 1001 carries a check interval of 300 hours, which is notably longer than the 50-hour check interval specified for all other listed configurations. This difference in monitoring frequency reflects a variation in service scheduling between the R2.60 and the rest of the R2 COM3 lineup despite an identical change interval and capacity.
  • The 50-hour check interval on configurations such as the R2.70, R2.80, R2.90, and R2.100 Hi-Profile indicates that fluid level verification is required at relatively frequent intervals relative to the full 1200-hour change cycle. A 50-hour check represents roughly 4% of the total change interval, suggesting close monitoring of differential fluid condition during normal operation.
  • Serial number cutoffs appear across multiple R2 COM3 variants, including the R2.70 with separate entries up to serial 15001 and 20001, and the R2.80 and R2.90 each with two distinct serial ranges. All of these share the same 6-liter capacity and 50-hour check interval, indicating the serial delineations reflect production batches rather than specification differences.
  • All specifications listed are designated for normal use conditions. In agricultural equipment service documentation, normal use typically refers to standard operating environments without the accelerated wear factors that would otherwise trigger shortened intervals under severe-use classifications.

Other Systems