Lamborghini R2

Power steering fluid capacity & service interval

Lamborghini R2 uses power steering fluid with a capacity of 41 liters. Service intervals include checking every 10 hours and changing every 1200 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • R2.56 (2004-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R2.66 (2004-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R2.76 (2004-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • R2.86 (2004-2009)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • On the Lamborghini R2, the power steering fluid is part of a shared system that also serves the transaxle and hydraulic functions, meaning the 41-liter capacity figure reflects the total fill volume for all three integrated circuits rather than a standalone power steering reservoir.
  • A 41-liter capacity is a notably large service fill, consistent with the demands of agricultural or utility machinery where hydraulic systems must sustain continuous high-load operation across extended working hours.
  • The R2.56, R2.66, R2.76, and R2.86 variants covering 2004-2009 all share an identical 41-liter capacity, indicating no variation in the combined transaxle/hydraulic/power steering system volume across the engine range.
  • The change interval is rated at 1200 hours or 12 months under normal use conditions, whichever comes first, applying equally to all four variants in the 2004-2009 range.
  • A 12-month calendar limit runs alongside the 1200-hour operational threshold, so a unit with low annual hours would still require a fluid change on the annual cycle before reaching the hour-based interval.
  • A check interval of 10 hours is specified under normal use conditions, reflecting the expectation that fluid level and condition in a high-demand shared hydraulic system warrant frequent monitoring well ahead of any scheduled change.

Other Systems