Lamborghini R2 Target

Coolant capacity & service interval

Lamborghini R2 Target coolant capacity ranges from 12 to 13 liters. Service intervals include checking at 10 hours and changing at 1200 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
R2.60 Target, ->10001 (2010-2015)
  • Use: Normal
  • Capacity 12 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
R2.70 Target, ->10001 (2010-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
R2.80 Target, ->10001 (2010-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
R2.90 Target, ->10001 (2010-2015)
  • Use: Normal
  • Capacity 13 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Lamborghini R2 Target cooling system capacity varies by engine variant, with the R2.60 holding 12 liters and the R2.70, R2.80, and R2.90 each holding 13 liters.
  • A 12-liter cooling system capacity, as seen on the R2.60 Target, represents a full system fill volume covering the engine block, cylinder head passages, radiator, and associated hoses.
  • The 13-liter capacity shared across the R2.70, R2.80, and R2.90 variants suggests a larger or more complex cooling circuit relative to the R2.60, consistent with higher-displacement engines requiring greater thermal management volume.
  • All four variants carry a coolant check interval of every 10 hours of operation, which reflects the demands of agricultural equipment running under sustained load conditions.
  • The coolant change interval across all R2 Target variants under normal use is 1,200 hours or 24 months, whichever comes first, meaning calendar time and operational hours are both active thresholds.
  • The serial number designation "->10001" applies to all four variants in the 2010-2015 range, indicating these specifications correspond to units produced up to serial number 10001.
  • The dual-condition change interval of 1,200 hours or 24 months is common in agricultural machinery, where seasonal use patterns may result in the time-based threshold being reached before the hour-based one.

Other Systems