Lamborghini Nitro R

Differential fluid capacity & service interval

Lamborghini Nitro R differential fluid capacity is 6 liters. Service intervals include checks every 500 hours and changes every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Nitro R 100 T4I, stage 3B->ZKDY380200TL10001 (2013-2017)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Nitro R 100 T4I, stage 3B->ZKDY460200TL10001 (2013-2017)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Nitro R 110 T4I, stage 3B->ZKDY420200TL10001 (2013-2017)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Nitro R 110 T4I, stage 3B->ZKDY500200TL10001 (2013-2017)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Nitro R 120 T4I, stage 3B->ZKDY540200TL10001 (2013-2017)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Nitro R 90 T4I, stage 3B->ZKDY340200TL10001 (2013-2017)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Lamborghini Nitro R front differential fluid capacity is 6 liters across all six configurations covered — the 90 T4I, 100 T4I (both serial variants), 110 T4I (both serial variants), and 120 T4I. A uniform 6-liter capacity across different power ratings indicates a shared front differential housing design rather than unit-specific sizing.
  • Each configuration carries a serial number threshold in its designation, such as "stage 3B->ZKDY380200TL10001," which identifies the specific production serial from which a given specification applies within the 2013-2017 model range.
  • The check interval for front differential fluid is set at 500 hours under normal use conditions. A 500-hour check interval is a periodic inspection point, not a fluid replacement, allowing for level verification and early detection of contamination or leakage before the full change interval is reached.
  • The change interval specifies 1000 hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format — combining an operational hour threshold with a calendar limit — accounts for machines that may accumulate hours slowly, ensuring fluid degradation over time does not go unaddressed regardless of usage intensity.
  • The 1000-hour change interval is double the 500-hour check interval, meaning a fluid inspection falls at the midpoint of every full change cycle. Under normal use conditions, this structure produces one intermediate check for every complete fluid replacement interval.
  • All six Nitro R configurations share identical front differential fluid specifications: 6-liter capacity, 500-hour check, and 1000-hour/12-month change interval. No variation exists across the 90, 100, 110, and 120 T4I power ratings for this system within the 2013-2017 period.

Other Systems