JCB Fastrac 8000 Series

Coolant capacity & service interval

JCB Fastrac 8000 Series coolant capacity ranges from 31 to 34 liters. Service intervals include 10 hours for checks and 2000 hours for changes. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Fastrac 8290-6, AGCO Power 84 LFVC (2023- )
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8330-6, AGCO Power 84 LFVC (2023- )
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8290-5, Agco 84 AWF Stage V (2019- )
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8330-5, Agco 84 AWF Stage V (2019- )
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8290-4, Agco 84 AWF Stage IV/T4f (2016-2019)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8330-4, Agco 84 AWF Stage IV/T4f (2016-2019)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8280-3 SCR (2011-2016)
  • Use: Normal
  • Capacity 31 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8310-3 SCR (2011-2016)
  • Use: Normal
  • Capacity 31 liter
  • Check 10 hours
  • Change 2000 hours
Fastrac 8250-2 (2006-2014)
  • Use: Normal
  • Capacity 33 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • The JCB Fastrac 8000 Series cooling system capacities range from 31 to 34 liters depending on the engine generation, with the earliest SCR-equipped variants holding the smallest volume and the Stage IV onward variants holding the largest.
  • The Fastrac 8250-2, produced from 2006-2014, carries a 33-liter cooling system capacity, placing it between the 31-liter SCR variants and the 34-liter Stage IV and later configurations.
  • Both the Fastrac 8280-3 SCR and the Fastrac 8310-3 SCR, covering 2011-2016, share an identical 31-liter cooling system capacity, reflecting the shared engine platform across those two model designations during that period.
  • The 34-liter cooling system capacity is consistent across all Agco 84 AWF Stage IV/T4f, Stage V, and AGCO Power 84 LFVC engine variants, spanning the 8290 and 8330 model lines from 2016 onward.
  • A 10-hour check interval applies uniformly across all listed configurations. In high-hour agricultural machinery, short-interval coolant level checks are standard practice to catch early signs of leakage or degradation before significant engine damage occurs.
  • The 2000-hour coolant change interval is consistent across every configuration in the 8000 Series. For agricultural tractors operating seasonally, 2000 engine hours can represent several years of field use, making the interval a long-service schedule rather than an annual one.
  • All specifications are listed under normal use conditions, meaning the 2000-hour change interval and 10-hour check interval apply to standard operating environments rather than severe-duty cycles.
  • The transition from the 8280-3 SCR and 8310-3 SCR to the Stage IV/T4f variants in 2016 coincides with a capacity increase from 31 to 34 liters, a difference of 3 liters that reflects the larger or more complex cooling demands of the updated engine architecture.

Other Systems