JCB Fastrac 8000 Series
Clutch fluid capacity & service interval
The JCB Fastrac 8000 Series uses clutch fluid with a capacity of 0.5 liter. The data covers 3 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Fastrac 8280-3 SCR (2011-2016) |
|
| Fastrac 8310-3 SCR (2011-2016) |
|
| Fastrac 8250-2 (2006-2014) |
|
Additional Notes
- The JCB Fastrac 8000 Series clutch fluid capacity is 0.5 liter across all three listed configurations: the 8250-2, the 8280-3 SCR, and the 8310-3 SCR.
- Each configuration specifies a hydraulic clutch system, meaning the clutch actuation relies on fluid pressure rather than a mechanical cable, which is why a defined fluid capacity is relevant to servicing.
- The 0.5 liter figure represents a relatively small reservoir volume, consistent with what is typical for a hydraulic clutch master cylinder and line circuit rather than a larger integrated hydraulic system.
- All three configurations carry a normal use condition designation, meaning the capacity and service parameters listed apply to standard operating conditions rather than a severe-duty or first-change-only scenario.
- The Fastrac 8250-2 covers model years 2006-2014, making it the earliest and longest-running configuration in the listed data, while the 8280-3 SCR and 8310-3 SCR both share a 2011-2016 production window.
- The SCR designation on the 8280-3 and 8310-3 refers to Selective Catalytic Reduction, an emissions control technology, yet the clutch fluid capacity of 0.5 liter remains identical to the non-SCR 8250-2, indicating the emissions system architecture did not alter the hydraulic clutch circuit volume.