JCB Fastrac 8000 Series

Brake fluid capacity & service interval

JCB Fastrac 8000 Series brake fluid capacity is 0,75 liter. Service intervals include a check at 10 hours and a change at 2000 hours. The data covers 18 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 8290-6, AGCO Power 84 LFVC (2023- )
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8290-6, AGCO Power 84 LFVC (2023- )
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8330-6, AGCO Power 84 LFVC (2023- )
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8330-6, AGCO Power 84 LFVC (2023- )
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8290-5, Agco 84 AWF Stage V (2019- )
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8290-5, Agco 84 AWF Stage V (2019- )
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8330-5, Agco 84 AWF Stage V (2019- )
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8330-5, Agco 84 AWF Stage V (2019- )
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8290-4, Agco 84 AWF Stage IV/T4f (2016-2019)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8290-4, Agco 84 AWF Stage IV/T4f (2016-2019)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8330-4, Agco 84 AWF Stage IV/T4f (2016-2019)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8330-4, Agco 84 AWF Stage IV/T4f (2016-2019)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8280-3 SCR (2011-2016)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8280-3 SCR (2011-2016)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8310-3 SCR (2011-2016)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8310-3 SCR (2011-2016)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8250-2 (2006-2014)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours
  • Fastrac 8250-2 (2006-2014)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours

Additional Notes

  • Across all JCB Fastrac 8000 Series configurations covered in these specifications, the hydraulic brake system capacity is 0.75 liter per circuit, with front and rear circuits each listed as separate entries at that same volume.
  • The separation of front and rear hydraulic brake circuits into individual entries reflects the Fastrac's architecture, where each axle carries its own dedicated brake fluid reservoir rather than a single shared system.
  • A 10-hour check interval applies to all brake fluid entries across every variant, from the Fastrac 8250-2 through to the 8330-6 generation. In machine operating hours, 10 hours represents a very short cycle, consistent with daily or near-daily inspection practice on high-use agricultural equipment.
  • The fluid change interval is set at 2000 hours under normal use conditions for every configuration in these specifications. At typical agricultural workloads, 2000 hours can represent several seasons of operation, making the change interval a long-term service event rather than a routine annual task.
  • The generation designations within the 8000 Series, such as -2, -3, -4, -5, and -6, correspond to different engine generations and emissions standards. The Fastrac 8250-2 and 8310-3 SCR variants cover model years 2006-2014 and 2011-2016 respectively, while later variants adopt Stage IV/T4f, Stage V, and AGCO Power 84 LFVC engines. Despite these powertrain differences, brake fluid capacity and service intervals remain identical across all of them.
  • The Stage IV/T4f variants, the Fastrac 8290-4 and 8330-4 with the Agco 84 AWF engine, span 2016-2019. Their Stage V successors, the 8290-5 and 8330-5, entered production from 2019 onward, with both sharing the same 0.75-liter per circuit capacity and 2000-hour change interval as the earlier Stage IV machines.
  • The most recent engine variant listed, the AGCO Power 84 LFVC fitted to the Fastrac 8290-6 and 8330-6, carries a production start year of 2023. Brake fluid specifications for front and rear circuits on these variants are unchanged from all preceding generations in the 8000 Series.
  • All entries in these specifications are classified under normal use conditions. No severe-duty or alternative interval figures appear for any variant or circuit within the 8000 Series brake fluid data.

Other Systems