JCB Fastrac 150 Series

Clutch fluid capacity & service interval

JCB Fastrac 150 Series clutch fluid capacity is 0,5 liter. Service intervals include checks at 50 hours and changes at 2000 hours or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Fastrac 150, -> 636.000 (1991-1997)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Fastrac 150, 636.001-> (1991-1997)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The JCB Fastrac 150 Series carries a clutch fluid capacity of 0.5 liter across both serial number ranges, a figure consistent with a hydraulic clutch system reservoir rather than a full overhaul fill.
  • Both configurations share an identical check interval of every 50 hours, reflecting the routine monitoring frequency expected for a hydraulic clutch circuit under normal use conditions.
  • The change interval is set at 2000 hours or 24 months, whichever comes first, meaning time elapsed can trigger a fluid change even before the hour threshold is reached in lower-utilization applications.
  • The serial number boundary at 636.001 separates the two listed configurations, yet both sides of that boundary carry the same 0.5 liter capacity and the same check and change intervals under normal use.

Other Systems