JCB Fastrac 155 Series

Brake fluid capacity & service interval

JCB Fastrac 155 Series uses brake fluid with a capacity of 0,75 liter. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 155, -> 636.000 (1991-1997)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 155, -> 636.000 (1991-1997)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 155, 636.001-> (1991-1997)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 155, 636.001-> (1991-1997)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The JCB Fastrac 155 Series carries a brake fluid capacity of 0.75 liter for each hydraulic brake circuit, with front and rear systems each holding that same volume as separate fills.
  • A check interval of 10 hours applies to both the front and rear hydraulic brake systems, reflecting the frequent inspection demands typical of agricultural machinery operating in demanding field conditions.
  • The change interval is set at 2000 hours or 24 months, whichever comes first, meaning time elapsed can trigger a fluid change even when the hourly threshold has not been reached.
  • All four rows share identical capacity and interval specifications, indicating that the front and rear brake circuits are treated as equivalent in terms of fluid volume and service scheduling.
  • The serial number boundary at 636.001 divides the Fastrac 155 into two production groups, yet both groups carry the same 0.75 liter capacity and the same 10-hour check and 2000-hour/24-month change intervals across both brake circuits.

Other Systems