JCB Fastrac 150 Series

Brake fluid capacity & service interval

JCB Fastrac 150 Series uses brake fluid with a capacity of 0,75 liter. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 150, -> 636.000 (1991-1997)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 150, -> 636.000 (1991-1997)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 150, 636.001-> (1991-1997)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 150, 636.001-> (1991-1997)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The JCB Fastrac 150 Series carries a brake fluid capacity of 0.75 liter for each hydraulic brake circuit, with front and rear systems each holding that same volume as separate fills.
  • A check interval of 10 hours applies to both the front and rear hydraulic brake systems, reflecting the frequent inspection demands typical of agricultural machinery operating in variable field conditions.
  • The change interval is set at 2000 hours or 24 months, whichever comes first, meaning time elapsed can trigger a fluid change even before the hour threshold is reached.
  • All four brake fluid entries across both serial number ranges carry a normal use condition, meaning the 2000-hour/24-month change interval is not adjusted for any severe-duty classification.
  • The specifications are divided across two serial number ranges: units up to serial number 636.000 and units from serial number 636.001 onward. Despite the serial number split, the capacity and interval figures remain identical across both ranges for both the front and rear circuits.

Other Systems