JCB Fastrac 145 Series

Brake fluid capacity & service interval

JCB Fastrac 145 Series uses brake fluid with a capacity of 0,75 liter. Service intervals include checking every 10 hours and changing every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Fastrac 145, -> 636.000 (1991-1997)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 145, -> 636.000 (1991-1997)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 145, 636.001-> (1991-1997)
  • Front
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Fastrac 145, 636.001-> (1991-1997)
  • Rear
  • Use: Normal
  • Capacity 0,75 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The JCB Fastrac 145 Series carries a brake fluid capacity of 0.75 liter for each hydraulic brake circuit, with front and rear systems each holding that same volume independently.
  • Front and rear hydraulic brake systems are treated as separate service points, meaning a full brake fluid service across both circuits accounts for a combined total of 1.5 liters.
  • The check interval for all four brake fluid service points is set at 10 hours, reflecting the demanding operating environment typical of agricultural machinery where fluid condition can change rapidly.
  • The change interval is specified at 2000 hours or 24 months, whichever comes first, applying equally to both the front and rear hydraulic brake systems across all listed serial number ranges.
  • Two distinct serial number ranges are covered within the 1991-1997 production span: units up to serial number 636.000 and units from serial number 636.001 onward, though both ranges share identical brake fluid capacities and service intervals.

Other Systems