Hürlimann H-6000
Power steering fluid capacity & service interval
Hürlimann H-6000 uses power steering fluid with a capacity range of 2 to 2,5 liters. Service intervals include checking at 125 and 150 hours, and changing at 1000 and 1200 hours. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| H-6136 (1985-1991) |
|
| H-6170 (1985-1993) |
|
| H-6130 (1982-1985) |
|
| H-6160 (1982-1985) |
|
Additional Notes
- The Hürlimann H-6130 carries a 2.5-liter power steering fluid capacity, which is the largest figure across all H-6000 configurations listed and stands apart from the 2-liter capacity shared by the H-6136, H-6160, and H-6170.
- A 2-liter capacity appears in three of the four configurations, covering the H-6136 (1985-1991), H-6160 (1982-1985), and H-6170 (1985-1993).
- The H-6130 and H-6160, both produced during the 1982-1985 period, share a check interval of every 125 hours under normal use conditions.
- The H-6136 and H-6170 share a longer check interval of 150 hours under normal use conditions, compared to the 125-hour interval of the earlier 1982-1985 models.
- A change interval of 1,000 hours under normal use applies to both the H-6130 and H-6160, each produced during the 1982-1985 period.
- The H-6136 and H-6170 carry a 1,200-hour change interval under normal use conditions, representing a 200-hour extension over the 1,000-hour interval associated with the 1982-1985 configurations.
- All four configurations specify normal use conditions, meaning none of the listed intervals are adjusted for severe-duty operation.