Hürlimann H-6000

Manual transmission fluid capacity & service interval

Hürlimann H-6000 manual transmission fluid capacity is 101 liters. Service intervals include checking at 125 hours or 150 hours and changing at 2400 hours or 3000 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
H-6170 (1985-1993)
  • Use: Normal
  • Capacity 101 liter
  • Check 150 hours
  • Change 2400 hours
H-6160 (1982-1985)
  • Use: Normal
  • Capacity 101 liter
  • Check 125 hours
  • Change 3000 hours
  • Code: 12/4

Additional Notes

  • The Hürlimann H-6160 and H-6170 share an identical manual transmission fluid capacity of 101 liters, a figure that reflects a full-system service fill for large agricultural powertrain housings of this class.
  • Despite the same 101-liter capacity, the H-6160 (1982-1985) and H-6170 (1985-1993) carry different check intervals, set at 125 hours and 150 hours respectively under normal use conditions.
  • The H-6160 specifies a fluid change interval of 3000 hours under normal use, while the H-6170 calls for a shorter change interval of 2400 hours under the same conditions, a difference of 600 hours between the two configurations.
  • The H-6160 is noted as a transaxle unit, meaning the transmission and axle share a common housing and fluid volume, which accounts for the substantial 101-liter capacity figure.
  • The H-6170 is classified as a conventional manual transmission rather than a transaxle, yet retains the same 101-liter capacity as the H-6160, indicating a similarly large enclosed drivetrain assembly.
  • Service intervals for both configurations are expressed in operating hours rather than calendar time or distance, which is standard practice for agricultural machinery where annual mileage is not a meaningful measure of wear.

Other Systems