Hürlimann H-6000

Automatic transmission fluid capacity & service interval

Hürlimann H-6000 uses automatic transmission fluid with a capacity of 101 liters. Service intervals include checks at 125 hours and changes at 3000 hours. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • H-6130 (1982-1985)
  • Hydraulic system
  • Use: Normal
  • Capacity 101 liter
  • Check 125 hours
  • Change 3000 hours
  • Code: 12/4

Additional Notes

  • The Hürlimann H-6000 H-6130 carries a combined transmission and hydraulic system capacity of 101 liters, a figure consistent with shared-sump designs common in agricultural tractors of the era, where a single reservoir serves both the transmission and hydraulic circuits simultaneously.
  • A 101-liter fill volume places the H-6130 firmly in the range of large-frame tractor specifications, reflecting the scale of the drivetrain and hydraulic demands typical of machines in the H-6000 series during the 1982-1985 production span.
  • The check interval for the transmission and hydraulic system is set at 125 hours under normal use conditions, meaning fluid level verification is required at relatively frequent intervals relative to the change interval, which is consistent with monitoring a high-volume shared sump for leakage or consumption.
  • The fluid change interval for the H-6130 under normal use conditions is 3000 hours, an extended service interval that reflects the large fluid volume involved, as greater fluid mass generally dilutes contamination more slowly and supports longer drain periods in normal operating environments.
  • The ratio between the 125-hour check interval and the 3000-hour change interval on the H-6130 is 24 to 1, indicating that fluid level is monitored twenty-four times for every full drain-and-fill cycle under normal use conditions.

Other Systems