Goldoni Milenio series

Coolant capacity & service interval

Goldoni Milenio series coolant capacity ranges from 7 to 11 liters. Service intervals include checks every 10 hours and changes every 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Milenio 35C (TX1A/TX1B/TX2A/TX2B), Lombardini LDW1503
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 24 months
Milenio 40 (TX3A/TX3B/TX4A/TX4B), Lombardini LDW1603
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 24 months
Milenio 45C (TX5A/TX6A), Lombardini LDW2204
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 24 months
Milenio 50F (FH0250), VM D703
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Milenio 70F (FH0270), VM D704
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Milenio 70RR (FH0074), VM D703-TI
  • Use: Normal
  • Capacity 7-8 liter
  • Check 10 hours
  • Change 24 months
Milenio 70V (FH0271/X), VM D754
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months
Milenio Q-85 (FH0085), VM D704-T
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • The Goldoni Milenio 35C and Milenio 40, fitted with the Lombardini LDW1503 and LDW1603 engines respectively, share an identical cooling system capacity of 7 liters, despite differing in engine displacement and power output.
  • The Milenio 45C, powered by the four-cylinder Lombardini LDW2204, carries a cooling system capacity of 8.5 liters, reflecting the greater thermal load of the larger displacement engine compared to the three-cylinder Lombardini units in the lower-powered variants.
  • The Milenio 50F, 70F, 70V, and Q-85 all carry an 11-liter cooling system capacity, the largest figure across the Milenio series, consistent with the VM diesel engines used in those configurations requiring greater coolant volume to manage heat rejection.
  • The Milenio 70RR, fitted with the VM D703-TI turbocharged and intercooled engine, specifies a cooling system capacity range of 7 to 8 liters rather than a fixed value, indicating a variable fill volume that may depend on configuration or assembly tolerances.
  • A 10-hour check interval applies uniformly across all Milenio cooling systems listed, a short interval typical of agricultural machinery operating in demanding field conditions where coolant level loss through minor leaks or evaporation can occur rapidly.
  • The 24-month coolant change interval is consistent across all eight configurations regardless of engine type or capacity, placing the service schedule on a calendar basis rather than an hours-based one, which is common when coolant additive degradation is time-dependent rather than load-dependent.
  • The VM D703 in the Milenio 50F and the VM D703-TI in the Milenio 70RR represent naturally aspirated and turbocharged variants of the same base engine family, yet the cooling system capacities differ substantially at 11 liters and 7 to 8 liters respectively, suggesting differences in cooling circuit design between the two tractor configurations.

Other Systems