Goldoni Cluster series

Brake fluid capacity & service interval

Goldoni Cluster series uses brake fluid with a capacity range between min and max. Service intervals include checking at 10 hours and changing every 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Cluster 70 (ZA7300), VM D703-TI
  • Use: Normal
  • Between min and max.
  • Check 10 hours
  • Change 24 months
Cluster 70 RS (ZS7300I), VM D703-TI
  • Use: Normal
  • Between min and max.
  • Check 10 hours
  • Change 24 months
Cluster 70 RS REV (ZS730VI), VM D703-TI
  • Use: Normal
  • Between min and max.
  • Check 10 hours
  • Change 24 months
Cluster 70 RS REV Variant (ZS730VD), VM D703-TI
  • Use: Normal
  • Between min and max.
  • Check 10 hours
  • Change 24 months
Cluster 70 RS Variant (ZS7300D), VM D703-TI
  • Use: Normal
  • Between min and max.
  • Check 10 hours
  • Change 24 months

Additional Notes

  • Across all five Goldoni Cluster series configurations covered — the Cluster 70, Cluster 70 RS, Cluster 70 RS REV, Cluster 70 RS REV Variant, and Cluster 70 RS Variant — the brake fluid specification applies exclusively to the hydraulic brake system.
  • The fluid level target is expressed as a range rather than a fixed volume, with the reservoir kept between the minimum and maximum marks rather than filled to a precise capacity figure.
  • A level check interval of 10 operating hours is specified under normal use conditions across all five configurations, reflecting the relatively short inspection cycle typical of compact agricultural machinery operating in demanding field environments.
  • The fluid change interval is set at 24 months under normal use conditions, meaning replacement is time-based rather than tied to operating hours for all listed variants.
  • All five configurations share the VM D703-TI engine designation, and the brake fluid specifications are identical across every one of them, with no variation in check interval, change interval, or fill guidance between the standard Cluster 70 and the RS, REV, and Variant derivatives.

Other Systems