Fendt Farmer 200 II

Manual transmission fluid capacity & service interval

Fendt Farmer 200 II manual transmission fluid capacity ranges from 24,4 to 26,4 liters. Service intervals include checking every 250 hours and changing every 2000 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Farmer 250 S (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 24,4 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Farmer 250 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 24,4 liter (2WD)
  • Capacity 26,4 liter (4WD)
  • Check 250 hours
  • Change 2000 hours/ 24 months
Farmer 260 S (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 24,4 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Farmer 260 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 24,4 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Farmer 270 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 24,4 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Farmer 280 P (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 26,4 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Farmer 280 S (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 24,4 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
Farmer 280 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 24,4 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • All Fendt Farmer 200 II transaxle manual transmission specifications apply under normal use conditions, with a fluid level check interval of 250 hours across every listed variant.
  • The fluid change interval is set at 2000 hours or 24 months, whichever comes first, and applies uniformly to all Farmer 200 II variants in the 1995-2002 range.
  • A transaxle unit integrates the transmission and axle differential into a single housing, which accounts for the relatively large fluid capacities seen across the Farmer 200 II lineup.
  • The majority of Farmer 200 II variants carry a transaxle capacity of 24.4 liters, covering the Farmer 250 S, 260 S, 260 V, 270 V, 280 S, and 280 V.
  • The Fendt Farmer 250 V stands apart from most variants by listing two distinct capacities: 24.4 liters for the 2WD configuration and 26.4 liters for the 4WD configuration, reflecting the additional fluid volume required by the front axle drive components integrated into the transaxle.
  • The Farmer 280 P shares the 26.4-liter capacity figure with the 4WD version of the Farmer 250 V, placing both at the higher end of the capacity range within the Farmer 200 II series.
  • All serial numbers referenced across the listed variants begin at 7001, indicating a production sequence boundary from which these specifications apply within the 1995-2002 model years.

Other Systems