Fendt Farmer 200 Overdrive

Brake fluid capacity & service interval

Fendt Farmer 200 Overdrive brake fluid capacity ranges from 0,5 to 0,7 liters. Service intervals include checks at 100 hours or 12 months/500 hours and changes at 2000 hours/24 months. The data covers 16 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
206 V/VA/F/FA/S/SA, 2001 -> (2006-2009)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 206 V/VA/F/FA/S/SA, 2001 -> (2006-2009)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
207 V/VA/F/FA/S/SA, 2001 -> (2006-2009)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 207 V/VA/F/FA/S/SA, 2001 -> (2006-2009)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
208 V/VA/F/FA/S/SA/P/PA, 2001 -> (2006-2009)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 208 V/VA/F/FA/S/SA/P/PA, 2001 -> (2006-2009)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
209 V/VA/F/FA/S/SA/P/PA, 2001 -> (2006-2009)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 209 V/VA/F/FA/S/SA/P/PA, 2001 -> (2006-2009)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
206 V/VA/F/FA/S/SA, 0001 -> 2000 (2003-2005)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 206 V/VA/F/FA/S/SA, 0001 -> 2000 (2003-2005)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
207 V/VA/F/FA/S/SA, 0001 -> 2000 (2003-2005)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 207 V/VA/F/FA/S/SA, 0001 -> 2000 (2003-2005)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
208 V/VA/F/FA/S/SA/P/PA, 0001 -> 2000 (2003-2005)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 208 V/VA/F/FA/S/SA/P/PA, 0001 -> 2000 (2003-2005)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours
209 V/VA/F/FA/S/SA/P/PA, 0001 -> 2000 (2003-2005)
  • Use: Normal
  • Capacity 0,7 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
  • 209 V/VA/F/FA/S/SA/P/PA, 0001 -> 2000 (2003-2005)
  • Pneumatic
  • Use: Normal
  • Capacity 0,5 liter
  • Check 100 hours

Additional Notes

  • The Fendt Farmer 200 Overdrive carries two distinct brake system types across all covered variants: a hydraulic brake/clutch system and a pneumatic brake system. Each system has its own fluid capacity and service schedule, and the two are not interchangeable in terms of maintenance intervals.
  • The hydraulic brake/clutch system holds 0.7 liters across all variants of the 206, 207, 208, and 209, regardless of suffix designation or serial number range. This capacity figure applies to a combined hydraulic circuit serving both the brake and clutch functions, which is why a single reservoir volume covers both operations.
  • The pneumatic brake system holds 0.5 liters across all the same variants and serial number ranges. A pneumatic brake circuit uses compressed air as the primary actuation medium, with fluid present in associated components such as the air dryer or moisture separator rather than as the primary force-transfer medium.
  • Hydraulic brake/clutch fluid on all listed variants is subject to a dual-trigger check interval: every 12 months or every 500 hours, whichever comes first. Using both a calendar period and an hour-based threshold reflects the reality that tractor operating hours can vary widely between seasons.
  • The hydraulic brake/clutch system fluid change interval is set at 2000 hours or 24 months under normal use conditions. At 2000 hours, brake fluid has typically absorbed enough moisture through normal hygroscopic action to warrant replacement, as water contamination lowers the fluid's boiling point.
  • The pneumatic brake system carries only a check interval of every 100 hours, with no fluid change interval listed in the specifications. The 100-hour check cadence is notably more frequent than the 500-hour check interval assigned to the hydraulic system.
  • The 208 and 209 variants include P and PA suffix designations not present on the 206 and 207. Despite this broader suffix range, the brake fluid capacities and service intervals for both the hydraulic and pneumatic systems remain identical across all four model numbers.
  • Serial number ranges divide each model into two groups: units numbered 0001 through 2000, corresponding to model years 2003-2005, and units numbered 2001 onward, corresponding to model years 2006-2009. Across both serial number groups, all brake fluid specifications are unchanged, meaning the serial number boundary carries no service differentiation for the brake system.

Other Systems