Fendt Farmer 200 II

Brake fluid capacity & service interval

Fendt Farmer 200 II brake fluid capacity is 0,5 liter. Service intervals include a 50 hour check and a 2000 hour or 24 month change. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Farmer 250 S (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Farmer 250 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Farmer 260 S (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Farmer 260 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Farmer 270 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Farmer 280 P (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Farmer 280 S (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
Farmer 280 V (../../7001->) (1995-2002)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Fendt Farmer 200 II brake fluid capacity is 0.5 liter across all listed variants, including the 250 S, 250 V, 260 S, 260 V, 270 V, 280 P, 280 S, and 280 V. A capacity at this level is consistent with a hydraulic brake system reservoir rather than a large integrated hydraulic circuit, reflecting the relatively contained volume of fluid needed to maintain pressure in a dedicated braking circuit.
  • All eight variants share an identical check interval of every 50 hours. On agricultural tractors, hour-based intervals are standard because operating time is a more meaningful measure of wear and fluid degradation than calendar time alone, given the variable and often intensive nature of field use.
  • The fluid change interval is specified as 2000 hours or 24 months, whichever comes first. The dual-condition format means the calendar limit of 24 months applies even when a machine has not accumulated 2000 operating hours, accounting for fluid degradation over time regardless of use intensity.
  • All specifications apply to normal use conditions. In agricultural equipment service documentation, a normal use designation typically covers standard field and transport operations, as opposed to severe conditions that might involve extreme temperatures, heavy continuous loads, or highly dusty environments.
  • Each variant carries the serial number threshold notation "../../7001->", indicating the specifications apply from serial number 7001 onward within the 1995-2002 production span. Serial number thresholds of this kind are used to distinguish specification revisions introduced partway through a production run.
  • The suffix letters in the variant designations, S, V, and P, denote different transmission or drivetrain configurations within the Farmer 200 II range. Despite these mechanical differences, the hydraulic brake system capacity and service intervals remain uniform across all listed configurations.

Other Systems