Fendt E series
Manual transmission fluid capacity & service interval
Fendt E series manual transmission fluid capacity is 12 liters. Service intervals include checking at 225 hours and changing at 450 hours. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 5185 E (2014- ) |
|
| 5225 E (2014- ) |
|
| 5220 E (2005-2014) |
|
| 5250 E (2005-2014) |
|
| 6250 E (2005-2014) |
|
Additional Notes
- Across all Fendt E series configurations covered here, the manual transaxle fluid capacity is uniformly 12 liters, a figure that reflects a service fill volume for an integrated transaxle unit rather than a separate gearbox and axle assembly.
- The 5220 E, 5250 E, and 6250 E, all spanning 2005-2014, share identical service intervals: a fluid level check at 225 hours and a full fluid change at 450 hours under normal use conditions.
- The 450-hour change interval on the 2005-2014 models is expressed in operating hours rather than calendar time, which is standard practice for agricultural equipment where annual usage varies widely between operators.
- The 225-hour check interval on the 2005-2014 models falls at exactly half the change interval, meaning one inspection occurs between each successive fluid change cycle.
- The Fendt 5185 E and 5225 E, both starting from 2014, carry the same 12-liter transaxle capacity as the earlier models but have no check or change interval listed in the specifications for those configurations.
- The consistent 12-liter capacity across the 5185 E, 5220 E, 5225 E, 5250 E, and 6250 E suggests a shared transaxle design across the E series lineup, regardless of the power class differences implied by the model numbering.