Fendt E series
Automatic transmission fluid capacity & service interval
Fendt E series automatic transmission fluid capacity is 20-44 liters. Service intervals include checking at 225 hours and changing at 450 hours. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
Additional Notes
- The Fendt E series covers the 5220 E, 5250 E, and 6250 E models, all sharing an identical capacity range of 20 to 44 liters for the combined transmission and hydrostatic system.
- A capacity range of 20 to 44 liters, rather than a single fixed value, reflects the difference between a partial service fill and a full overhaul or dry-fill scenario, where all internal passages and reservoirs are completely evacuated before refilling.
- All three models carry the same check interval of 225 hours under normal use conditions, meaning fluid level verification is scheduled at the halfway point between drain intervals.
- The change interval of 450 hours under normal use applies uniformly across the 5220 E, 5250 E, and 6250 E, with no variation tied to engine displacement or model designation within the E series range.
- The 225-hour check interval paired with a 450-hour change interval establishes a two-to-one ratio, a common service structure in heavy equipment designed to catch fluid degradation or level loss before a full drain is due.
- The normal use condition designation on all three rows indicates the 450-hour change interval is not adjusted for high-load or dusty operating environments, as only a single use condition is specified across the entire E series for this system.