Deutz-Fahr Series 5 D TTV

Brake fluid capacity & service interval

Deutz-Fahr Series 5 D TTV uses brake fluid with a capacity of 1 liter. The service interval requires a check every 50 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5090 D TTV, Stage 3B->ZKDET60200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5090.4 D TTV, Stage 3B->ZKDEU40200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5095 D TTV, Stage 5->ZKDHU70200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5100 D TTV, Stage 3B->ZKDEU00200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5100.4 D TTV, Stage 3B->ZKDEU80200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5105 D TTV, Stage 5->ZKDHU80200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5110.4 D TTV, Stage 3B->ZKDEV20200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
5115 D TTV, Stage 5->ZKDHU90200TD50001 (2021- )
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • Across all eight configurations of the Deutz-Fahr Series 5 D TTV covered here, the hydraulic brake system holds a capacity of 1 liter. In the context of fluid servicing, a 1-liter figure represents the total system volume, which is typical for a sealed hydraulic brake circuit rather than a large open reservoir.
  • The Series 5 D TTV lineup covered spans two distinct emissions standards: Stage 3B and Stage 5. The Stage 3B variants include the 5090, 5090.4, 5100, 5100.4, and 5110.4, while the Stage 5 variants are the 5095, 5105, and 5115. Despite this regulatory difference, the brake fluid capacity and check interval are identical across both groups.
  • Each configuration carries a serial number threshold, such as ZKDET60200TD50001 for the 5090 D TTV, indicating that the 1-liter capacity and 50-hour check interval apply specifically from those serial numbers onward from 2021.
  • The 50-hour check interval applies under normal use conditions. In agricultural machinery, a 50-hour interval is a relatively short cycle, reflecting the safety-critical nature of hydraulic brake fluid monitoring, where contamination or moisture absorption can degrade braking performance.
  • The ".4" suffix variants, the 5090.4, 5100.4, and 5110.4, represent distinct model designations within the Stage 3B group. All three share the same 1-liter brake fluid capacity and 50-hour check interval as their non-.4 counterparts.
  • The specifications apply to the hydraulic brake system specifically, distinguishing brake fluid from other hydraulic fluids used elsewhere in the tractor. A dedicated hydraulic brake circuit of this size is consistent with wet-disc or oil-immersed brake designs common in modern agricultural tractors.

Other Systems