Deutz-Fahr Series 5 C

Coolant capacity & service interval

Deutz-Fahr Series 5 C uses coolant with a capacity of 11 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
5090 C, -> ZKDY360200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5100 C, -> ZKDY400200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5100 C, -> ZKDY480200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5110 C, -> ZKDY440200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5110 C, -> ZKDY520200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
5120 C, -> ZKDY560200TD10001 (2014-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Deutz-Fahr Series 5 C cooling system capacity is 11 liters across all six serial number configurations spanning the 5090 C, 5100 C, 5110 C, and 5120 C variants produced from 2014-2018.
  • An 11-liter cooling system capacity is typical of a compact-to-mid-range agricultural tractor, reflecting the volume of coolant required to fill the engine block, cylinder head passages, radiator, and associated hoses as a complete service fill.
  • The coolant check interval of every 10 hours is notably frequent and reflects the demands of agricultural equipment operating under sustained load conditions, where heat cycling and minor seepage can affect coolant levels more rapidly than in light-duty applications.
  • The change interval is set at 2000 hours or 24 months, whichever comes first. The dual-trigger structure means calendar time governs servicing even when annual operating hours fall short of the 2000-hour threshold, since coolant degrades chemically over time regardless of use.
  • All six serial number variants — covering the 5090 C through 5120 C — share identical capacity and interval specifications, indicating a common cooling system architecture across the range despite differences in engine displacement suggested by the varying model designations.
  • The serial number prefixes (e.g., ZKDY360200TD10001, ZKDY480200TD10001) function as production sequence identifiers, and the specifications listed apply to units from the start of each respective serial range through the 2014-2018 model period.

Other Systems