Deutz-Fahr AgroXtra

Differential fluid capacity & service interval

Deutz-Fahr AgroXtra differential fluid capacity is 5 liters. Service intervals include checking at 500 hours and changing at 1000 hours or 12 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • DX 4.47 (AgroXtra) (1993-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 3.57 (AgroXtra) (1992-1996)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.07 (AgroXtra) (1991-1996)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.17 (AgroXtra) (1991-1996)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 6.07 (AgroXtra) (1991-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 6.17 (AgroXtra) (1991-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • DX 4.57 (AgroXtra) (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • All seven Deutz-Fahr AgroXtra variants listed — the DX 3.57, DX 4.07, DX 4.17, DX 4.47, DX 4.57, DX 6.07, and DX 6.17 — share an identical front differential fluid capacity of 5 liters, indicating a consistent axle housing design across the range.
  • A 5-liter front differential capacity is a moderate fill volume for agricultural tractors of this era, typical of a front axle differential rather than a combined axle and final drive assembly, which would generally require a larger total volume.
  • The check interval for front differential fluid across all listed models is set at 500 hours under normal use conditions, meaning fluid level verification is due at half the frequency of a full drain-and-fill service.
  • The change interval is specified at 1000 hours or 12 months under normal use conditions, whichever comes first. The inclusion of a calendar-based limit alongside the hour-based one reflects that fluid degradation can occur through time and moisture ingress even when operating hours accumulate slowly.
  • The DX 4.47 carries the narrowest production window of the group, spanning 1993-1995, while the DX 4.57 has the earliest start year in the dataset at 1990, yet both share the same 5-liter capacity and service intervals as the rest of the lineup.
  • The DX 3.57 is the only model with a start year of 1992, making it the latest introduction among all seven variants, while the DX 4.07, DX 4.17, DX 6.07, and DX 6.17 all share a 1991 start year.

Other Systems