Deutz-Fahr AgroVector
Differential fluid capacity & service interval
Deutz-Fahr AgroVector differential fluid capacity ranges from 5 to 8 liters. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Deutz-Fahr AgroVector carries separate front and rear differential fluid capacities, meaning each axle requires an independent service fill rather than a shared reservoir.
- On the AgroVector 26.6 and 26.6 LP, the front differential holds 7.9 liters under normal use conditions, while the rear differential holds 5 liters, a difference of 2.9 liters between the two axles.
- The AgroVector 26.6 and 26.6 LP share identical front and rear differential capacities with each other, at 7.9 liters front and 5 liters rear, indicating no capacity distinction between the standard and LP variants.
- The AgroVector 30.7 front differential capacity is 8 liters under normal use conditions, which is 0.1 liters greater than the front differential capacity specified for the 26.6 and 26.6 LP variants.
- The AgroVector 30.7 rear differential holds 7.8 liters under normal use conditions, a notably larger rear capacity compared to the 5 liters specified for the 26.6 and 26.6 LP, reflecting a difference of 2.8 liters between the two configurations.
- On the AgroVector 30.7, the front and rear differential capacities are relatively close to each other at 8 liters and 7.8 liters respectively, whereas the 26.6 variants show a more pronounced gap between front and rear axle fill volumes.
- All six rows across the three variants carry a normal use condition designation, meaning none of the listed differential capacities are tied to severe-duty or first-change-only service scenarios.