Deutz-Fahr Agrokid

Coolant capacity & service interval

Deutz-Fahr Agrokid coolant capacity ranges from 4,5 to 5,5 liters. Service intervals include checks at 10 hours and changes at 1200 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Agrokid 30 (2003-2004)
  • Use: Normal
  • Capacity 4,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrokid 40 (2003-2004)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrokid 50 (2003-2004)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrokid 25 (2000-2004)
  • Use: Normal
  • Capacity 4,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrokid 25 hydraulic drive (2000-2004)
  • Use: Normal
  • Capacity 4,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrokid 35 (2000-2004)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrokid 45 (2000-2004)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Agrokid 4.35 (1996-2004)
  • Use: Normal
  • Capacity 5,5 liter
  • Check 10 hours
  • Change 1200 hours

Additional Notes

  • The Deutz-Fahr Agrokid cooling system capacity splits into two distinct values across the range. The Agrokid 25, Agrokid 25 hydraulic drive, and Agrokid 30 each hold 4.5 liters, while the Agrokid 35, Agrokid 4.35, Agrokid 40, Agrokid 45, and Agrokid 50 each hold 5.5 liters. The 1-liter difference reflects the larger engine displacement in the higher-numbered variants.
  • A coolant check interval of 10 hours applies uniformly across all Agrokid variants. In agricultural equipment, a 10-hour check interval corresponds roughly to daily inspection during active use, given that a standard working day in field operations is commonly measured in single-digit to low double-digit hours.
  • The coolant change interval for most variants is specified as 1200 hours or 24 months, whichever comes first. The dual-trigger format means a calendar limit of two years applies even when the machine has not accumulated 1200 operating hours, which is relevant for low-utilization units.
  • The Agrokid 4.35 (1996-2004) carries a coolant change interval stated only as 1200 hours, without the accompanying 24-month calendar limit present in the other variants. This makes the 4.35 the sole model in the range with a purely hour-based coolant change specification.
  • The Agrokid 25 and Agrokid 25 hydraulic drive share identical cooling system specifications, including the 4.5-liter capacity, the 10-hour check interval, and the 1200-hour/24-month change interval. The hydraulic drive designation refers to the transmission type rather than any difference in the cooling circuit.
  • The Agrokid 30 and Agrokid 50 both cover the 2003-2004 model years, representing the shortest production windows in the range. Despite the difference in model designation and power output, both share the same change interval structure of 1200 hours or 24 months.
  • All specifications listed are under normal use conditions. In service documentation for agricultural machinery, normal use typically denotes standard field operation without the elevated thermal or contamination loads associated with severe-duty classifications such as continuous high-load work or extreme ambient temperatures.

Other Systems