Deutz-Fahr AgroVector
Coolant capacity & service interval
Deutz-Fahr AgroVector coolant capacity is 15,1 liters. The service interval is 1500 hours. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| AgroVector 26.6 (2007-2010) |
|
| AgroVector 26.6 LP (2007-2010) |
|
| AgroVector 30.7 (2007-2010) |
|
Additional Notes
- The cooling system capacity across the AgroVector 26.6, 26.6 LP, and 30.7 is 15.1 liters, which represents the total volume of coolant the system holds during normal service fills.
- A 1,500-hour change interval applies to all three configurations under normal use conditions, meaning the coolant is scheduled for replacement after that amount of engine operating time rather than on a calendar basis.
- The Deutz-Fahr AgroVector 26.6 and 26.6 LP share an identical cooling system capacity of 15.1 liters, indicating no difference in cooling system volume between the standard and LP variants despite their designation difference.
- The AgroVector 30.7, which carries a larger engine displacement designation, also holds 15.1 liters of coolant, the same figure as the smaller 26.6 variants across the 2007-2010 model years.
- The 1,500-hour interval is tied specifically to normal use conditions, which in agricultural equipment contexts generally refers to standard field operation as opposed to more demanding or dusty environments that would otherwise shorten service intervals.