Deutz-Fahr Agrotron X

Coolant capacity & service interval

Deutz-Fahr Agrotron X requires coolant with a capacity of 36 liters. Service intervals include checks at 10 hours and 100 hours, with a change interval of 1000 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Agrotron X710, -> WSXJ330400LD10001 (2009-2013)
  • Use: Normal
  • Capacity 36 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Agrotron X710, -> WSXL900400LD10001 (2009-2013)
  • Use: Normal
  • Capacity 36 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Agrotron X720, -> WSXJ340400LD10001 (2009-2013)
  • Use: Normal
  • Capacity 36 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
Agrotron X720, -> WSXL930400LD10001 (2009-2013)
  • Use: Normal
  • Capacity 36 liter
  • Check 10 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The Deutz-Fahr Agrotron X cooling system capacity across all four listed configurations is 36 liters, a volume consistent with large-displacement agricultural tractor engines where extended coolant reserves support sustained thermal regulation under heavy field loads.
  • Three of the four configurations share a 100-hour coolant check interval under normal use conditions, meaning the system is inspected for level and condition at that frequency without a full fluid change being required.
  • The Agrotron X720 variant identified by serial number prefix WSXL930400LD10001 carries a 10-hour coolant check interval under normal use, which is notably shorter than the 100-hour check interval specified for the other three configurations.
  • The coolant change interval is consistent across all four configurations at 1000 hours or 12 months under normal use conditions, whichever comes first, reflecting a time-based threshold alongside the operational hour limit.
  • The 12-month calendar limit on coolant changes means the fluid is subject to replacement on an annual basis regardless of whether the 1000-hour mark has been reached, which is relevant for machines with lower annual operating hours.
  • Both Agrotron X710 configurations, distinguished by their respective serial number prefixes WSXJ330400LD10001 and WSXL900400LD10001, carry identical capacity and interval specifications across the 2009-2013 model range.

Other Systems